Festo EGSP Serie Instrucciones De Utilizacion página 26

EGSP/EGSK
Screw bolts into all the 4 mounting
S
holes.
Take care that the screwheads do not
S
protrude above the countersinks.
Tighten the mounting screws evenly. The
S
tightening torque is summarised in the
table below.
EGSP/EGSK−...
Screw
Countersink depth
Tightening torque
1) in accordance with DIN 6912 (flat head)
Fig. 5
Installing the effective load
Note
If the steel slide becomes bent against a
buckled effective load, the service life of
the guide will be reduced.
S Make sure that the mounting surface of
the effective load is even to within
t 0.05 mm.
Place the effective load so that the pull−out torque from the force (parallel to
S
the axis of motion) and lever arm remains low.
26
Fig. 4
15 20
1)
M3 M3
[mm] 2 3
[Nm] 1.2 1.2
Fig. 6
26 33 46
M4 M5 M6
4 5.4 6.5
2.9 5.9 9.9
Festo EGSP/EGSK 0901NH English