PSC Duet Guía De Referencia Rápida página 8

Indicator Lamp
•
•
•
•
Speaker
•
•
•
Changing The
ble volume settings (low, medium and high). Stop when the preferred volume
is heard.
4
On dim – Indicates that the scanner is operational and ready to scan.
Flashes once brightly when the scanner has read a bar code to indicate
a good read. This is usually accompanied by a good read tone from the
speaker.
Flashing from dim to bright once per second indicates the scanner is in
the Sleep Mode due to an extended time of inactivity.
Flashing repeatedly accompanied by a series of tones indicates a failure
has occurred. Contact your service personnel.
Normal Tone – A single tone when the scanner reads a bar code indi-
cates a good read.
Passed Selftest – A series of four tones are emitted when power is first
applied to the scanner. This indicates the scanner passed the Selftest
and is operating properly.
Error Tone – The speaker sounds a series of tones alerting the operator
of a possible system or component failure. If your scanner exhibits this
behavior or behaves erratically, contact your service personnel.
Volume—Scan the bar code below to cycle through the three possi-
Increment Volume
Duet™