NESTOR MARTIN TQH13 Manual De Instrucciones página 106

SELF-CLEANING OF THE WINDOW
Your appliance is equipped with an integrated glass pane cleaning system ("Airwash") which uses hot air to
minimalize the marks on the glass pane. If you use a dry fuel, a large part of the tar deposited on the window
will burn and disappear when the appliance is running at a high temperature.
If marks appear on the glass pane (after a long, slow burning fi re for example), follow this procedure to quickly
clean the glass pane:
•
Set the UPPER AIR SUPPLY control to maximum.
•
Set the LOWER AIR SUPPLY control to a quarter open. This setting
allows a little air to enter under the fi re as well as the usual preheated
air used for wood combustion.
•
Once the majority of the marks have disappeared, reset the controls to their original positions.
SETTING THE MINIMUM AIR INTAKE
The minimal setting is found to the right of the control buttons. It allows you to increase, decrease or completely
close the minimum air inlet when burning a slow fi re in the appliance. Adjust it in accordance with the pull of
your chimney if necessary.
The minimum setting screw is
situated behind the control panel.
Using a cross-headed screwdriver,
tighten
( clockwise) to decrease or to
completely close the minimum air
intake.
Turn it anti-clockwise to increase
the minimum air intake.
106
the regulating screw