NESTOR MARTIN TQH13 Manual De Instrucciones página 108

REPLACING THE Glass pane
To replace the glass pane
• Lift the hearth door to remove it from the hinges.
• Lay the door on a fl at surface.
• Unscrew the eight nuts on the iron door that holds
the glass pane.
• Remove the iron door from the unit.
• Replace the glass pane.
REMOVING THE PLEXUS (CONTROL UNIT)
iron door
glass pane
cast iron door
108
IIt is possible to remove the control
unit for maintenance. This must be
carried out by a quali fi ed technician:
> Open the door and the gate.
> Unscrew and remove the control
panel using a Torx screwdriver.
> Unscrew the 4 Torx fi xing screws
from the control unit by going through
the holes provided in the iron support
> Pull the control unit out towards the
front.
iron support grate
control unit (plexus)
control panel
C07100DB805