NESTOR MARTIN TQH13 Manual De Instrucciones página 97

SETTING UP ON THE STAND
Tools required
•
Torx, cross-headed screwdriver or screw gun
19mm diameter latch key
•
•
Size 8 Allen key (BTR)
Number of people: 3 - 4
Procedure
•
Place the stand in the prepared position
•
Place the stove on the stand using a lift or sharing the weight between several people.
•
Turn the stove so that the fi xing screw of the plinth cover is accessible.
•
Unscrew the fi xing screw of the plinth cover (2 screws for the low base and 4 for the log-storing base) and
remove it. (See photo 1)
•
Unscrew the 2 fi xing screws (Torx screws) from the control panel and remove it (photo 2).
•
Pass the bolt through the stand and into the mounting hole.
•
Using the latch key, bring the nut in front of the hole and screw it in with the Allen key (photo 3).
Photo 1
Accessories provided
•
Replace the control panel and the base cover using the
screwdriver or screw gun.
Photo 3
• Bearing bolt
• M12 self-locking nut
Photo 2