Craftsman 27706 Manual De Instrucciones página 4

IV. Maintenance and Storage
Keep all nuts, belts and ecmws tight to be sure the
equipment is in safe working conditlen.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free of
grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or deteriora-
tion.
Replace wom or damaged parts for safety.
If the fuel tank has to be drained,this shouldbe done
outdoors.
On multi-bladedmachines, take care as rotatingone
blade can cause otherblades to rotate.
When machine is to be parked, stored or left unattended,
lower the cutting means unless a positive mechanical
lock is used.
_ CAUTION: Always disconnect spark plug wire and
place wire where it cannot contact spark plug in
order to prevent accidental starting when setting up,
transporting, adjusting or making repairs.
4