Chapter 15 Installation Of The Software; Demand Of Editor - Gima CONTEC08A Manual De Instrucciones

73
• Excessive patient movement.
• Outside ray radiation.
• Improper SpO probe installation or incorrect contact position of the patient.
2
• Temperature of SpO
• Place the SpO probe on an limb that has a blood pressure cuff, arterial catheter,
2
or intravascular line.
• Concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin (COHb)
and methemoglobin (MetHb).
• SpO is too low.
2
• Bad circular injection of the part being measured.
• It is required to use SpO
when changes SpO
Chapter 15
Installation of the Software

15.1 Demand of Editor

Pentium IV 1.8G or more
Operation System: Windows XP
EMS memory: 256M or more
Hard Disk: 40G or more
Display: 17 inch or more
CD-ROM
USB: 2 or more
Resolution of printer: 600 DPI
probe(optimum temperature between 28°C and 40°C).
2
probe which is provided by our company, contact with our sale department
2
probe.
2
ENGLISH