Publicidad
Idiomas disponibles
Idiomas disponibles
Ÿ
Plug the device only into a socket installed according to safety regulations and with amains voltage
of 220 - 240V!
Ÿ
The AC/DC power adaptor must not come into contact with water or moisture.
Ÿ
The device should only come into contact with water up to the MAX marking.
Ÿ
Keep the device out of reach of persons (including children) who cannot fully appreciate the potential risks of
handling electrical equipment.
Ÿ
Always remove the plug from the wall socket in case of any malfunction, after each use and before cleaning.
Ÿ
Only use the supplied power adapter.
Ÿ
Do not pull the plug out of the socket by its cable.
Ÿ
Route the mains cable so it does not come into contact with sharp-edged or hot objects.
Caution!
Risk of injury:
Ÿ
The plastic surfaces, the water, the container and the cooked food can be hot during and after operation. Risk of
burns! Only touch with suitable protective gloves.
Ÿ
Do not touch the metal parts, in particular the immersion heater and the propeller.
Ÿ
Use a suitable container that guarantees a stable position of the device, danger of tilting!
Ÿ
Always operate with the protective cover.
Important information on product safety!
Ÿ
Do not expose your device to extreme temperatures, vibrations or shocks.
Ÿ
Do not immerse the device completely in water. Water can penetrate and cause malfunction. Not suitable for
dishwasher.
Ÿ
Operate the device on a heat and water resistant flat surface.
Ÿ
Do not operate the device on hot surfaces (such as hotplates).
Ÿ
Use only high quality vacuum sealer bags suitable for heating.
Elements
(see page 2 and 3)
Housing
Fig.01-A:
Socket for power adaptor at the back of instrument
Fig.01-B:
Support at the back of instrument.
Fig.01-C:
Protective cover
Display
Fig.02-A:
NOW = icon current temperature
Fig.02-B:
Thermometer symbol = current temperature
Fig.02-C:
Current temperature in ° C
Fig.02-D:
Warning symbol = low water level
Fig.02-E:
Target symbol = exact target temperature is reached
Fig.02-F:
TARGET = icon target temperature
Fig.02-G:
Circular symbol = device activated
Fig.02-H:
Timer symbol = cooking time
Fig.02-I:
Clock symbol = time delay
Fig.02-K:
Thermometer symbol = target temperature
Fig.02-L:
Stop symbol = device switches off
Fig.02-M:
Target temperature in ° C / delay / cooking time in hrs. / min.
10
Publicidad
