Publicidad
A.
1
B.
1
1
2
SHUT OFF WATER SUPPLIES. Drill two 1-1/2" diameter holes in finished
A.
surface, one for the transfer valve and one for the spray support assembly.
NOTE: The length of the braided metal hose limits the distance between the
transfer valve and deck fitting. The distance between the transfer valve and deck
fitting should not exceed 18" with the braided metal hose furnished.
Loosen screws (1) until cardboard tube (2) is free. Rotate nest (3)
B.
90˚ and remove. Remove cardboard tube and discard.
3
D.
Install spray support assembly (1) from below. Replace nest (2) on spray
C.
suport assembly and rotate 90° to expose screws (3).
Tighten screws (1) with a regular slotted screwdriver. NOTE: One screw
D.
can be fully tightened before the other screw is tightened.
5
46684 Rev. A
Publicidad
