Franklin Electric ESP50AM Manual De Instrucciones

SAFETY WARNINGS
B E F O R E O P E R AT I N G O R
INSTALLING THIS PUMP, READ
THIS MANUAL AND FOLLOW
ALL SAFETY RULES AND
OPERATING INSTRUCTIONS.
SAFETY
CAREFULLY READ THESE SAFETY
MESSAGES IN THIS MANUAL AND ON
PUMP.
CAUTION
DO NOT OPERATE THIS PUMP DRY!
•
• Review instructions before operating.
WARNING - ELECTRICAL PRECAUTIONS
All wiring, electrical connections, and system ground-
ing must comply with the National Electrical Code
(NEC) and with any local codes and ordinances. Em-
ploy a licensed electrician.
WARNING - RISK OF ELECTRICAL SHOCK
• Have an electrician provide electrical power to the
motor plug receptacle.
• Always disconnect plug from power source before
handling.
• This product is furnished with a three prong plug
for grounding, connect only to properly grounded
receptacle.
• Do not under any circumstances remove ground
plug.
• Keep electric plug dry.
• Do not lift pump using cord.
• Not investigated for use in swimming pool area.
• A ground fault interrupter (GFI) protected circuit is
recommended for use with any electrical appliance
operating in or near water.
This pump is suitable for sump and effluent water
applications where the total head requirement (including
pipe friction losses) does not exceed the pump's maximum
capability. 1/3 HP handles up to 1/2" diameter spherical
solids. 1/2 HP handles up to 3/4" diameter spherical solids.
SUBMERSIBLE
SUMP / EFFLUENT PUMPS
ESP50AM,ESP50AV, ESP50M,
ESP33AM, ESP33AV, ESP33M
ESP50AM
APPLICATION
Also, the maximum solids size must not be greater than
the pump capability. This pump is for use in Sump and
Effl uent applications, NOT FOR USE IN RAW SEWAGE
APPLICATIONS.
ESP33AV