Tivoli Audio MUSIC SYSTEM BT Manual De Usuario página 11

5. ENTER: Same function as pressing the Volume Control in on the Music System BT to set
selections or adjust the treble.
6. 7, 8, 9, 0: Use these buttons in addition to the 1-6 buttons to access a CD track directly. A two
second window is provided to enter another digit after the first digit is entered.
Saved favorite station presets can be recalled using the 1 through 6 buttons on the remote
control.
Controlling volume via the remote is performed using the up/down arrow buttons, while FM/
AM tuning is controlled using the Left and Right arrow (CD track) buttons.
When operating the remote control at close distances the display might pulse. This is normal
and is a direct result of the remote's ability to operate at greater distances.
When it comes time to replace the remote control's battery, use a 3V Lithium Cell #CR2025,
installed with the positive side facing the bottom side of the remote.
Menu
Press and hold the volume knob on the Music System BT, or press and hold the Menu button on
the remote control, to enter the main menu. Rotate the knob and press in to change the items within
the menu, or use the remote's pq buttons and Select button.
1. AUTO SCAN (NOT IN AUX OR BLUETOOTH MENUS): Press the Select button and use the
pq arrow and Select buttons to enable or disable Auto Scan. When enabled, Auto Scan will
automatically tune the next station received each time the pq buttons are pressed. When
disabled, the pq buttons can be used to manually navigate the frequencies.
2. RDS TEXT (NOT IN AM, AUX, OR BLUETOOTH MENUS): Press the Select button and use
the up/down arrow and Select buttons to choose between FM RDS scrolling text On, Off, or
Static (text will be displayed but will not scroll).
3. AUTO UPDATE (NOT IN AM, AUX OR BLUETOOTH MENUS): Press the Select button and
use the pq arrow and Select buttons to choose between On or Off. For the auto update to
work, you must have consistent reception of FM RDS with a time/date signal provided. It could
take up to a minute or more for the clock to update. Tivoli Audio is not responsible for inac-
curate time/date information provided by the auto update signal. To set the clock manually,
select "Off", and set the time and date using the "Clock" button.
4. FM TUNING STEP (NOT IN AM, AUX, OR BLUETOOTH MENUS): Choose 100 or 50 kHz FM
tuning step. 100 kHz is recommended.
5. FACTORY RESET: Press Select and use the pq and Select buttons to confirm (Yes) or reject
(No) the factory reset. A factory reset will restore factory defaults and cancel all your personal
settings such as presets.
11 – ENGLISH