Important Safety Warnings - Microsoft Surface Hub 55 Manual De Usuario

Microsoft Surface Hub
Wall Mount Assembly and Mounting Guide (55"/84")
For mounting on a wall with wood studs
These instructions assume wood-stud wall construction with 2-by-4 studs spaced 16 inches apart, covered with drywall/gypsum board. The supplied mounting screws are for use only in 1/2" or 5/8" thick drywall/gypsum
board walls less than 10 feet high. For any other kind of wall, ask a professional installer for advice on the appropriate hardware and methods.

Important safety warnings

Before assembling and mounting Microsoft Surface Hub on the wall mount, read these important safety warnings.
This symbol identifies safety and health messages in this Device Guide
WARNING: Read safety & health information
Read this guide for important safety and health information. Keep all printed guides for future reference. Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious
injury or death, or damage to the device or devices. For an online version of this guide and additional support, safety, and health information, go to: www.surface.com/support/surface-hub.
WARNING: Installation experts – knowledge
Improper handling or installation could result in injury or death. To avoid hazards related to improper installation, ensure the installation is performed by people who have read and understand the installation instructions
prior to beginning. If you do not have the necessary equipment and expertise, or if you are not certain that the mounting surface can properly support the Surface Hub, consult a professional installer. It is the consumer's
responsibility to ensure that the wall can properly support the total weight.
WARNING: Minimum number of installers
In order to reduce the risk of injury, Microsoft Surface Hub 55" requires a minimum of two people and Microsoft Surface Hub 84" requires a minimum of four people to perform the installation.
WARNING: Proper Mounting to Wall
To reduce the risk of the device falling, resulting in injury, death, or damage to the device, ensure that:
• The wall strength and mounting method are appropriate to support the weight of this device. The included mounting hardware is designed for Surface Hub held by 2x4 wood studs with 1/2" or 5/8" drywall/gypsum board wall 10 feet high
or lower. For other wall types, ask a professional installer for advice. Reinforcement might be necessary for some materials such as plaster/thin plastic board/wood before starting installation.
• If your wall is not 2x4 studs, 16 inches apart with 1/2" or 5/8" drywall/gypsum board 10 feet high or less, purchase the correct hardware to support the device in your installation.
• Use only wall mounts intended for use with the Surface Hub model you're mounting.
• Securely tighten all fasteners according to the instructions. Do not overtighten.
K
EN
1