OneTouch VerioIQ Manual De Usuario página 80

5
Care and Maintenance
Be sure to squeeze out any
excess liquid before you
wipe the meter. Hold the
meter with the test strip port
pointed down. Use a Clorox®
Germicidal Wipe to wipe the
outside of the meter, lancing
device, and cap until the
surface is damp.
Allow the surface of the meter, lancing device, and cap to
remain damp for 1 minute.
Wipe dry with a clean, sterile
gauze and allow to air dry.
Wash hands thoroughly with soap and water after
handling the meter, lancing device and cap.
79