Laser Safety Notices - Leuze electronic BPS 300i Manual De Instrucciones

Laser safety notices

ATTENTION
LASER RADIATION – CLASS 1 LASER PRODUCT
The device satisfies the requirements of IEC/EN 60825-1:2014 safety
regulations for a product of laser class 1 and complies with 21 CFR
1040.10 except for conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8, 2019.
Ä
Observe the applicable statutory and local laser protection regula-
tions.
Ä
The device must not be tampered with and must not be changed in
any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
Commissioning
1
All dimensions in mm
Mounting
Mounting through bore holes in the housing for M4 screws or using the
BTU 0300M-W, BT 300 W, BT 56, BT 300-1 mounting system (accessories).
NOTICE
The mounting instructions can be found in the operating instructions.
NOTICE
Degree of protection IP 65!
Degree of protection IP 65 is achieved only with MS 3xx, MK 3xx,
ME 3xx or KB 30x connection hood and when M12 connectors or cable
bushings are screwed on and caps are mounted.
Minimum tightening torque of the housing connecting screw of the con-
nection hood is 1.4 Nm
EN
13