Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL WIRING DIAGRAM:
MOUNTING OPTIONS:
C
E
D
A: End Cap
B: Chain Mounting with V-Hook
C: Surface Mounting
D: T-Bar Clip Mounting
E: Wiring Knockouts
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
INSTALLATION INSTRUCTIONS
Black (Line)
White (Neutral)
Green (Grd)
Dimming Wire
to 0-10v IEC
compliant control
CHAIN MOUNTING WITH V-HOOK
B
Attach customer-supplied V-hooks to each end of the luminaire base.
Attach customer-supplied chain to the V-hooks and mounting surface. As
A
shown at point B.
SURFACE MOUNTING
Secure the luminaire base to mounting surface by inserting customer-
supplied #8 anchor screws, toggle bolts, or other suitable fasteners
(depending on structural conditions) into keyhole slots on the top side of the
luminaire base. As shown in at point C.
T-BAR CLIP MOUNTING
Attach customer-supplied T-bar clips to the designated opening on the
luminaire. Bring luminaire into T-bar ceiling grid and secure luminaire to the
grid. As show in at point D.
STR - LED Strip Fixture
LED DRIVER
Lead wire to LED load
Publicidad
