Machine Description; Operating Cycle Description; Commands Description; Control Pannel Description - Bezzera ARCADIA DE PID Manual De Instrucciones

3 - MACHINE DESCRIPTION

3.1 Operating cycle description

The water arriving from the mains through a motor pump, adjusted to a pressure between 9 and 10
bar (0.9 – 1 MPa), goes through a pressure relief valve, adjusted to 12 bar (1.2 MPa), allowing both
the boiler and the heat exchanger to be filled. The water in the boiler, heated by a resistor, in turn heats
the water in the heat exchanger, which, thanks to a drip riser, is sent to the group in order to brew the
coffee by means of an electronically-controlled valve.

3.2 Commands description

(Fig. 01 - Fig. 08)
1 Steam knob
2 Light switch
3 Keypad for dispensing coffee/water
4 Steam wand
5 Hot water tap
6 Boiler drain plug
7 Portafilter
8 TFT Touch screen Display
9 Machine power switch
10 Motor-driven pressure gauge
11 Blind filter
12 1 cup filter
13 2 cup filter

3.3 Technical data

The ARCADIA espresso coffee maker is built in 1 to 3 group versions.
The 2 group version is described in this booklet; however, the instructions for use and the layout of the
controls are the same for the other versions.
The A-weighted sound pressure level of the coffee machine is less than 70dB.
Power supply
Resistance
Nominal power
Resistance
Power supply
Resistance
Nominal power
Resistance
Width "A"
Depth "B"
Height "C"
Net weight
Gross weight (pallets)
Water input connector
Drain connector
(Fig. 02)
ARCADIA
1 GROUP
V~/Hz
V~
W 1650
W 1400
V~/Hz
V~
W 2250
W 2000
mm 644
mm 565
mm 525
kg 48
kg 61
MOD.
3.2.1 Controls pannel description
(Fig. 06)
a Regualr coffee pre-selection key
b Long coffee pre-selection key
c Double regular coffee pre-selection key
d Double long coffee pre-selection key
e Continuous/stop key
f Tea key
ARCADIA
2 GROUPS
110 - 120 / 50-60Hz
110
3000
2600
220 - 415 / 50-60 Hz
230
3400
3000
824
565
525
60
73
G 3/8"
G 3/4"
35
BEZZERA ARCADIA DE PID
ARCADIA
3 GROUPS
3500
3000
5500
5000
1034
565
525
76
92