Add To A Dictation (Insert); Finish A Dictation - Philips Digital Pocket Memo LFH 9600 Guía Rápida

3.3

Add to a dictation (insert)

Dictations are recorded in overwrite mode by default. Follow these steps to switch to insert
mode to make additions to your dictation:
The 4-position slide switch (12) must be in the
1
Press the FUNCTION KEY
2
• In insert mode, the record position of the 4-position slide switch reads
LED (10) is green.
• In overwrite mode, the record position of the 4-position slide switch reads
status LED (10) is red.
Fast forward or fast rewind to the position where the insertion should be made.
3
Move the 4-position slide switch to the
4
not overwrite dictation.
Press the FUNCTION KEY
5
If the dictation is not finished, simply fast forward to the end of the file and continue
6
recording.
D Note: An index mark can be set by pressing the
record. It is possible to quickly access the spoken instructions and index marks by using the
smart buttons during fast wind / fast rewind.
3.4

Finish a dictation

When a dictation is finished and no additional changes will be made, follow these steps to mark
the dictation finished:
Move 4-position slide switch (12) to the
1
Press the end-of-letter (
2
displayed.
To assign priority status to the dictation, press the
3
┲
The symbol is displayed, indicating that the dictation has priority status.
D Note: Once the dictation is marked as finished, it can no longer be modified or deleted. To
make changes to the dictation, press the
10
(3) to switch between insert and overwrite recording modes.
iREC
again to switch back to the overwrite mode.
STOP
EOL) button to mark the dictation as finished. The
EOL
STOP position.
position and start dictating. The insertion will
INDEX smart button (2a) during playback or
position.
EOL button again within half a second.
button again to remove the finished mark.
iREC and the status
REC and the
┱
symbol is
Quick reference guide