SICK UE 4215 Manual Del Usuario página 122

Chapter !
,
Fig. 8: Dimensional
drawing of the safe
busnode UE 4215 (mm)
122
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
( #
! 3
The response time corresponds to the propagation time in the safe
busnode UE 4215. This is the maximum time required, i.e. also in
case of a fault, between the shut down of the sensor outputs and the
availability in the AS-interface chip in the safe busnode.
To calculate the safety distance for a protective device you must also
take into account:
the response time of the ESPE connected to the safe busnode
UE 4215
the response time of the safe busnode UE 4215
the response time of the safety monitor
the stopping/run-down time of the machine or system
Information on the response times of the corresponding devices can
be found in the related operating instructions.
! + # / $
Operating Instructions
8 010 654/O571/19-08-04