Breitling EXOSPACE B55 YACHTING Manual De Instrucciones página 13

A short press on the crown will light up the two digital displays. If the
TILT
function has been activated (see chapter 7.b), the light will automatically
switch on depending on the position of the wrist.
The watch has two pushpieces (P1 at 2 o'clock and P2 at 4 o'clock), whose action
is connected to the function selected. Depending on the desired action, the user
must give a short or long (about 2 seconds) press. If no action is associated with the
pushpieces, will appear in the upper screen.
NOP
: indicates that the watch is in the process of calculating.
WAIT
(overflow) indicates that a counter limit has been exceeded.
OVF
d) Light intensity setting
A long press on the crown activates the light intensity setting mode. This setting
takes place by turning the crown: will appear in the upper screen, then select
LIGHT
x – x which represents the level from 1 to 4. The new setting must be confirmed
/4
by a short press of the crown. After 10 seconds, the watch automatically exits the
setting function.
The higher the figure, the greater the light intensity. Bear in mind that the greater
the light intensity, the more battery is used, which will result in shorter autonomy
(see chapter 2).
12