• If necessary, adjust the minutes in 15-minute increments and confirm by pressing
P2; the seconds flash (
• Adjust the seconds (which will automatically be adjusted in the
and confirm by pressing P2.
• Press the crown back to neutral position 1.
N.B.: When in setting mode (
from 0. The seconds counter only stops when the seconds are manually modified.
In this case, it restarts when exiting setting (putting the crown back to neutral
position 1). The seconds are automatically synchronized on the
timezones.
In
mode, pressing P1 makes it possible to go into
TIME
date according to different formats (see chapter 8). A long press on P1 puts the
display directly back to
In
mode, a long press on P2 allows to choose between either the 12-hour (
TIME
or
indicator) or the 24-hour display. The change also happens automatically for
PM
the
zone and the seven alarms.
TIME 2
appears on the upper screen).
SECOND
), pressing P1 will restart the seconds counter
SETTIME
.
TIME
DATE
26
and
TIME 2
and
UTC
TIME 2
mode and display the
)
UTC
AM