3. Set the exact time on the UTC timezone (
main time base – and not the local time (see chapter 4).
4. Set the date (
SETDATE
5. Set the main TIME zone (
time (see chapter 6).
6. Press the crown back to neutral position 1.
Depending on the state of the watch prior to being charged, only some, if any,
settings will be required.
N.B.: It is only possible to adjust the minutes in one-minute increments in
In
or
TIME
TIME 2
UTC time and the minutes in 15-minute increments. The seconds on the other hand,
can be adjusted precisely in each of the timezones and will automatically be updated
in the other zones.
It is clear that in the event of a change of summer/winter time or the contrary,
and/or
timezones must be changed, and not the
TIME 2
4. ADJUSTING THE TIME BASE OF THE WATCH (
UTC time is the watch's main time base. The minute on the time base can only
be adjusted in 1-minute increments in this mode. Any modification to UTC time
will automatically have an effect on
) (see chapter 5).
SETTIME
mode, the hours are adjusted depending on the difference with
), which constitutes the watch's
SET UTC
) with regard to the difference with the UTC
)
UTC
and
TIME
TIME 2
22
UTC
time.
UTC
(the latter being adjusted
mode.
TIME