Threading The Machine - Baby Lock Zest BL15B Instrucción Y Guia De Referencia

c
z
v x
b
z
c
x
v
b

Threading the Machine

Raise the thread take-up lever to its highest
position by turning the handwheel toward you.
Raise the presser foot.
Place a spool on the spool pin as shown, with
thread coming from back of the spool.
z Draw the thread into thread guide using both
hands.
x While holding the thread near the spool, draw
the end of the thread down around the check
spring holder.
c Firmly draw the thread up and through the
take-up lever from right to left.
v Draw the thread down and slip it into needle
bar thread guide on the left.
b Thread the needle eye from front to back.
NOTE:
You may cut the thread end with sharp
scissors for easier needle threading.
24