Getting To Know Your Machine; Contents Of Package; Unpacking And Clean-Up - Craftsman 124.47747 Manual Del Operador

E
B
A
A. Base
B. Table Lock Handle
C. Table
D. Table Tilt Locking Screw
E. Column Support Tube
F. Handle Return Spring
G. Depth Stop

Unpacking and Clean-up

1. Carefully remove all contents from the
shipping carton. Compare the contents with
the list of contents to make sure that all of the
items are accounted for, before discarding
any packing material. Place parts on a
protected surface for easy identification and
assembly. If any parts are missing or broken,
please call Craftsman Customer Service or
Technical Assistance at 877-866-8392 (M-F
8:30AM-5PM EST.) as soon as possible for
replacements. DO NOT turn your machine
ON if any of these items are missing. You
may cause injury to yourself or damage to the
machine.

GETTING TO KNOW YOUR MACHINE

G
F
C
D

CONTENTS OF PACKAGE

N
M
L
H.
I.
J.
K.
L.
M.
N.
2. Report any shipping damage to your local
distributor.
3. Clean all rust protected surfaces with
ordinary house hold type grease or spot
remover. Do not use; gasoline, paint thinner,
mineral spirits, etc. These may damage
painted surfaces.
4. Apply a coat of paste wax to the table to
prevent rust. Wipe all parts thoroughly with a
clean dry cloth.
5. Set packing material and shipping carton
aside. Do not discard until the machine has
been set up and is running properly.
7
J
K
Belt Cover
Motor
Motor/Belt Adjusting Knob
Feed Handles
Chuck
Chuck Key & Holder
On/Off Safety Switch
H
J
I