Agilent Technologies Turbo-V 300 ICE Serie Manual De Instrucciones página 236

17 Technical Information
Use
Confirm the flasing digit by pressing the PUMP CURRENT key.
L
S
Where:
Confirm the flashing digit by pressing the PUMP CURRENT key.
H
S
Where: XXKRPM = is the switch point of relay S1 at the preset
turbopump speed, adjustable from 00 to 56 KRPM.
The speed threshold will condition the S1 and S2 operation (see the
following cycle diagram] and it is factory-set to 53 KRPM.
Press the CYCLE NUMBER push-button to select the first number.
L
S
Where: XXKRPM = is the switch point of relay S1 at the preset
turbopump speed, adjustable from 00 to 42 KRPM.
The speed threshold will condition the S1 and S2 operation (see the
following cycle diagram] and it is factory-set to 24 KRPM. Press the
CYCLE NUMBER push-button to select the first number.
236/260
XX = 27 ÷ 56 KRPM
O W S
E T T I N
XX = 12 ÷ 56 KRPM
. S . T
E T T I N
. S . T
E T T I N
Turbo-V 300 ICE Controller User Manual / 87-900-902-01 (M)
P E E D
G : X X
H R E S H
G : X X
H R E S H
G : X X
K R P M
O L D
K R P M
O L D
K R P M