Manual Mode; Program Mode - Bremshey Sport RN2 Manual De Instrucciones

Explanation of displays
Display
Main display
Modes
Quick start mode
After you switch on the console, you can start your workout immediately by pressing
the START button.
▪ Press the START/STOP button to start the equipment.

Manual mode

1. Switch on the equipment.
2. Press the ENTER button.
3. Press the +/- buttons to set the time (12 - 99 minutes). Press the ENTER button
to confirm.
4. Press the START/STOP button to start the program.
5. Press the START/STOP button again to stop the program.

Program mode

1. Switch on the equipment.
2. Press the MODE button to select one of the preset programs.
NOTE
– The display shows a program menu with 8 programs (fig. G): 6
preset programs (P01-P06), 1 user program (U01) and 1 heart rate
control program (H01).
3. Press the +/- buttons to select a program. Press the ENTER button to confirm.
RN2
Explanation
The display shows the selected program. The display
also shows messages in specific modes.
The display shows the value for a specific item: time,
distance, calories, pulse, laps and scan (items one
after another).
The display shows the value for speed.
The display shows the value for incline.
EN
21