Phoenix Contact UM IA RAD-SOL-SET-24 Serie Manual De Instrucciones página 129

7150_ia_05
Grounding solar panels
NOTE: Grounding required
If the mounting pole or structure is non-conductive, we recommend running a separate
wire to earth ground in accordance with national regulations.
8. Connect a cable with a diameter of 6 mm
bracket (see Figure 4-12). Then run the wire to a suitable earth-ground.
3
Figure 4-12 Example: Grounding of a solar panel when mounted to a non-conductive
pole
Key:
1 Washer
2
2 Wire, 6 mm
3 Terminal screw
2
to the frames of the solar panels or the
1
2
7150A019
Installation
4-21
PHOENIX CONTACT