RAD-SOL-SET-24-...
1-2
PHOENIX CONTACT
Battery
WARNING: Risk of electric shock at the batteries
The system has two batteries which are operated in series. When installing batteries,
please note that there is a risk of personal injury due to short circuits and damage may be
caused to the system.
•
Take particular care when installing the batteries in the control cabinet.
•
Avoid short circuits between the [+] and [–] battery poles, e.g., caused by a tool or
control cabinet parts.
•
Only use insulated tools.
•
When installing the battery, connect the positive pole [+] first. When removing the
battery, disconnect the negative pole [–] first.
•
Make sure that the connecting cables are fitted securely.
•
Do not lift up or pull the battery by the battery poles.
•
Avoid shocks and sudden loads on the batteries.
•
Despite the very low gas emission of the battery, do not install any sparking parts
(switches, relays or similar) in the direct vicinity of the battery.
•
If the battery is operated at its operating temperature limits, this may reduce the
service life of the battery (depending on duration, charge, etc.).
7150_ia_05