Introduction; Safety - Phoenix Contact UM IA RAD-SOL-SET-24 Serie Manual De Instrucciones

1

Introduction

7150_ia_05
The solar systems RAD-SOL-SET-24-100 and RAD-SOL-SET-24-200 from
Phoenix Contact provide a reliable power supply of 24 V DC continuously throughout the
year.
Unless labeled otherwise, the illustrations given in this user manual depict the solar
system RAD-SOL-SET-24-100.
1.1

Safety

Please read all instructions carefully before attempting to install and wire the solar system.
Keep this user manual to hand for future reference.
WARNING: Risk of electric shock
Even at low voltages electrical parts can pose a danger.
• For your safety, ensure that the installation, maintenance, and repair of the system is
only carried out by qualified personnel in strict accordance with the applicable
regulations governing health, safety, building technology, and electrical engineering.
Solar panels
WARNING: Risk of electric shock at solar panels
Solar panels can produce hazardous voltages whenever exposed to sunlight. Even when
not in full sunlight.
• Therefore, when working with solar panels or connecting cables during the daytime,
cover solar panels with an opaque material.
Control cabinet
WARNING: Risk of electric shock when fuses are installed
When carrying out any work on the solar panel, loads or battery, make sure that fuses for
the solar system are not installed in the fuse terminal blocks of the control cabinet
electronics.
• Before carrying out any work on the solar system, remove the three fuses from the
fuse terminal blocks in the control cabinet in the specified order (1. Solar panel,
2. Battery, 3. Loads). This will isolate the voltage sources from the circuit.
Introduction
1-1
PHOENIX CONTACT