General Information; Purpose Of The Manual; Unit And Manufacturer'S Identification; Request For Assistance - After-Sales Service - FPZ SCL K05 Instrucciones

8

GENERAL INFORMATION

8.1

PURPOSE OF THE MANUAL

•
The purpose of the manual is to provide the operator and maintenance personnel with "instructions for use" to prevent and
minimise risks during the interaction of man and unit.
•
The information was prepared by the manufacturer in the original language (ITALIAN) according to the principles of professional
writing and in compliance with the applicable regulations.
•
To facilitate its reading and understanding, the principles of communication best suited to the characteristics of the recipients have
been adopted as far as possible.
•
Keep the manual and enclosed documentation for the entire service life of the unit in a known and easy to access place so that it is
always at hand for reference.
•
To easily find specific information, see the table of contents.
•
Any observations made by recipients can be an important contribution to improving the after-sales services provided by the
manufacturer.
•
Some information may not entirely match the actual configuration of the work unit delivered.
•
Some parts of the text, or those of considerable importance, are indicated by symbols, whose meaning is described:
ATTENTION
NOTES FOR THE
USER
8.2

UNIT AND MANUFACTURER'S IDENTIFICATION

The nameplate gives all the unit's identification details, which should always appear in all correspondence between the user and
manufacturer (e.g. requests for assistance or for replacement parts as described in par. 1.3).
The nameplate is placed on the machine:
8.3

REQUEST FOR ASSISTANCE - AFTER-SALES SERVICE

All requests for After-Sales Service intervention must be sent to the following email address:
•
customercare@fpz.com
Specifying:
•
Type of unit;
•
Serial no.;
•
Defect found;
•
Use the RMA form enclosed with this manual
8.4

REPLACEMENT PARTS

All requests regarding replacement parts must be sent to the following email address:
•
customercare@fpz.com
Specifying:
•
Type of unit;
•
Serial no.;
•
Code of part to be ordered;
ENERGOEKONOM spol. s r.o., Wolkerova 433, CZ-250 82 Úvaly, Czech Republic, Tel.: +420 281 981 055, info@energoekonom.cz, www.energoekonom.cz
These are generic or specific DANGER symbols and indicate hazards that can cause even serious accidents
to people if the required precautions are not taken.
This is the PROHIBITED symbol and indicates operations that must not be carried out because they can result
in even serious accidents to people.
The word ATTENTION is used to provide additional information and in particular to point out hazards that can
cause serious damage.
NOTES are used to provide information allowing the user to make best use of the unit, with best performance,
and for safety and respecting the environment.
It is strictly forbidden to remove or tamper
with the nameplate.
30 / 100