Storage And Transport - FPZ SCL K05 Instrucciones

IMPROPER USE
IMPROPER USE LINKED TO NORMAL OPERATION
Failure to comply with the distance for the
motor air intake
Presence of operators
contact with the machine
Use of loose clothing or untied long hair
IMPROPER USE LINKED TO METHODS OF USE
Failure to install the required sensors
without providing for equivalent protection
systems
Failure to comply with the operating
conditions (par. 2.2):
- Ambient temperature outside the limits
or incorrect
- Altitude above 1000 m
- Failure to consider system and filter
pressure losses
Failure to install the filter (for use with
suction in the place)
Operation outside curve (P/Q)
(Pressure /Flow rate)
Rigid connection between the machine
and system
Use of the unit with current values not
corresponding to nominal
IMPROPER USE LINKED TO MAINTENANCE WORK
Failure to clean the filter
Failure to eliminate of layers of surface
dust
FAULT CONDITIONS / EMERGENCY CONDITIONS
Not stopping the machine when making an
abnormal noise.

11 STORAGE AND TRANSPORT

The tipping over or falling of heavy loads can cause crushing and injury Place the packages in a stable way.
Do not place loads on the packages.
•
Store the machine in a dry place, if possible keeping it in its packaging.
•
Do not remove the protection from the openings.
The falling of heavy loads can cause crushing and injury or even death!
Before carrying out handling operations (lifting, moving, carrying, storage) check the weight, or mass (m), of the unit given in the
"SPECIFICATIONS" and decide the most suitable method in order to ensure maximum safety.
Therefore, all the risk prevention measures must be met, including any local and/or particular regulations on safe handling:
• by suitably qualified and adequately instructed personnel;
• using appropriate means;
• organising the work so that it is done with minimum risk and in safe and healthy conditions;
• with a safe and stable support surface;
• with the use of suitable work clothes and personal protection equipment (gloves and goggles, safety shoes and helmet);
• on a work area with sufficient space, flat floors, without obstacles;
• avoiding knocking, jerking and jolting.
Units weighting more than 25 kg have lugs for handling.
Different packaging is used, depending on the size and weight; once the package is brought near the installation area, open it, take out
the documents and then remove the machine as illustrated below.
ENERGOEKONOM spol. s r.o., Wolkerova 433, CZ-250 82 Úvaly, Czech Republic, Tel.: +420 281 981 055, info@energoekonom.cz, www.energoekonom.cz
CONSEQUENCES
Motor overheating and possible damage to
the blower
and possible Operator coming into contact with hot
parts of the machine
Possible catching or suction in the
machine or in the motor fan
Failure to control the machine, without the
possibility
malfunction or emergency in general
Machine performance different from the
data given, possible motor faults and
seizing of the impeller
Particles entering the blower with seizing
of the impeller
Machine performance different from the
data given, possible motor faults and
seizing of the impeller
Abnormal vibrations for the machine
and/or system with possible seizing of the
impeller.
Possible overheating of the machine and
motor when powered by an inverter.
Seizing of the impeller
Machine overheating
Damage with possible seizing of the
impeller, machine
possible motor damage.
Danger due to suspended loads.
Danger due to lifting of heavy loads!
of stopping in case of
overheating and
36 / 100
RISKS
RISK FOR THE MACHINE
RISK FOR THE OPERATOR
RISK FOR THE OPERATOR
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS