Amprobe MultiTest 1000 Manual Del Usuario página 30

If two measurement
connected to
conductor, when
pressed the instrument displays the
message alongside.
THE PREVIOUS RESULTS CANNOT BE SAVED.
SAVE
If one cable is not connected to the
network or one phase is absent, the
instrument displays
alongside
Black cable=L1 is not connected to one phase of
the installation. Voltage between phase L3 and
phase L1 is null (L3 - L1).
Black cable=L1 is not connected to one phase of
the installation. Voltage between phase L1 and
phase L2 is null (L1-L2).
If two or more cables of the instrument
are not connected, it displays the screen
alongside.
SAVE
SAVING:
cables were
the same phase
START/STOP
the screen
The tests can be stored pressing the SAVE key twice (refer
to paragraph 5.1).
ν ph
is
0
0 388
V
V
0
0
V
Message
double":
cables
connected to the
same
conductor.
Black cable= L1
is not connected
to one phase of
V
the
Voltage between
phase
phase L3 is not
null (L2- L3).
V
0
V
"PH
two
are
phase
installation.
L2 and