Advanced Bionics myPilot Manual Del Usuario página 13

ZoomControl (Optional/for Bilateral Recipients Only)
To Access the ZoomControl Screen:
,
Select ZoomControl and choose
the desired listening direction using
the and arrow keys.
The ZoomControl screen is not available in the direct control mode
care professional for more information.
Naída CI Listening Check
Listening to the Microphone(s) and Auxillary Inputs
A convenient test mode is built into all Naída CIs to enable individuals with unaided hearing to
listen to sound sources. With the AB myPilot, all sound sources can be listened to independently.
Without the AB myPilot, sound sources are listened to on a program-by-program configuration.
The following sound sources can be listened to:
Microphones (Front and Rear, Headpiece, T-Mic 2)
•
FM receivers
•
• T-Coil
Wireless streamed sources from the ComPilot
•
22
AB myPilot User Guide
Alternatively, press and hold the
center button for two seconds while
Home
in the screen to access the
ZoomControl screen directly.
.
Please ask the hearing
To conduct a listening check of the auditory input sources of the Naída CI, the recipient must
first connect the Naída CI Listening Check to the Naída CI.
1
Remove the battery from the Naída CI, if
not already removed. Connect the top of the
Naída CI Listening Check to the Naída CI
3
Connect headphones to the 3.5 mm
auxiliary plug on the side of the
Naída CI Listening Check.
When the Naída CI Listening Check is attached, the Naída CI immediately enters listening
check mode, and the AB myPilot automatically goes to the Listening Check menu. From the
menu, you can select the desired input source you would like to listen to.
If you select T-Coil, make sure you are synced to either a loop or Phonak myLink. Provide input
to the FM transmitter to assess audio quality.
If you select Wireless, you will be listening to whatever audio source is being streamed through
the ComPilot (i.e. Bluetooth device, FM, battery operated device, etc). To begin the process, turn
on the ComPilot and begin streaming from the desired source. If listening to FM input, connect
the wireless FM receiver to the Euro socket located on the ComPilot, and synchronize it with the
FM transmitter. Provide input to the FM transmitter to assess audio quality.
2
Connect the bottom of the Naída CI
Listening Check to the battery (any of
the Naída CI power sources will work).
23
AB myPilot User Guide