Selecting Preferred Home Screen; Home Screens; Direct Control; Changing Volume - Advanced Bionics myPilot Manual Del Usuario

Selecting Preferred Home Screen

1
To select different Home screens, enter the
menu by pressing the center button, then
scroll down to select Settings.
The standard mode gives you the full overview, including program, sensitivity, and volume information.
•
In the direct control mode, each button directly selects the indicated program number.
•
This mode is for program and volume control only, with no menu or ZoomControl screen
access. To learn how to exit the direct control mode, see page 15.
From any screen or menu level, press the center button for four seconds to return to the default
settings of the Naída CI and the Home screen.
In any screen, the recipient can return to the Home screen by briefly pressing the power button.

Home Screens

Standard
Battery
Status
Program
Icon
A
Program
Name
Volume Setting of Left Naída CI
A
14
AB myPilot User Guide
2
From the Settings menu, scroll down and
select Home screens.

Direct Control

Command
Confirmation
Indicator
B
A
Volume Setting of Right Naída CI
B
The screens of the AB myPilot may look different, depending on the preferences set by the
hearing care professional.
Standard Mode
The standard mode gives the full overview, including program, sensitivity, and volume information.
Press the left or right arrow (
•
Press the up or down arrow (
•
see
• Short press the center button to access the sub-menus.
Press the center button for two seconds to change to the ZoomControl screen. See page 22 for details.
•
If bilateral, when paired to both Naída CIs, all program changes made by the AB myPilot are
applied to both Naída CIs simultaneously, unless otherwise specified by the recipient.
The order of the program sequence is set by the hearing care professional during the fitting
process. For further information on hearing programs, please ask the hearing care professional.
Direct Control Mode
In the direct control mode, each key selects the indicated program number.
Programs
Short Press
2 Second Press
The program names are shown for 10 seconds after a new program is selected.
Press the up or down arrow (
•
Clock
• Press the left and right buttons (
B
control mode and enter the standard mode.
The available hearing programs are set by the hearing care professional.
Program
Numbers
In the direct control mode, the screens for volume control, sensitivity control, sub-menus, and
ZoomControl are not available. Quick Access, however, is available.

Changing Volume

The Volume screen shows the volume settings, including the most comfortable level, which was
defined by the hearing care professional during the fitting process.
/ ) to scroll back and forth through the hearing programs.
/ ) to enter the volume screen. To change the volume,
page 15 for details.
Left Center
1 2
4 2
/ ) to change the volume.
+ ) simultaneously for two seconds to exit the direct
AB myPilot User Guide
Right
3
5
15