If the AB myPilot scans to find Naída CIs in the surrounding area or tries to do a device status
readout or a battery status readout but is unsuccessful in doing these tasks, the No Response
Screen
(Figure A)
and 'Closer - Try Again'
move the AB myPilot and Naída CI closer together and try the task again.
Recommended Operating and Storage Temperature Ranges
Condition
Operating Temperature
Storage Temperature
Naída CI External Equipment and Accessories
Model Number
CI-5245-XXX
*Applied part per IEC 60601-1
The Xs denote model number variant related to product color and/or length.
NOTE:
Service and Warranty
Advanced Bionics offers you a comprehensive warranty which becomes effective on the date
of implantation. Please ask your hearing care professional about the details and duration. This
warranty covers any repairs due to defects in material and/or workmanship. The warranty does
not cover damage from improper handling or care, exposure to chemicals, immersion in water
or undue stress. Damage caused by third parties or non-authorized service centers renders
the Advanced Bionics warranty null and void. This warranty does not include any services
performed by a hearing care professional in their office.
Declaration of Conformity
Hereby Advanced Bionics AG declares that this product meets the requirements of the AIMDD
90/385/EEC (Active Implantable Medical Device Directive), R&TTE Directive 1999/5/EC (Radio
and Telecommunications Terminal Equipment), EMC Directive 2004/108/EC (Electromagnetic
Compatibility), and LVD 2006/95 EC (Low Voltage Directive). The full text of the Declaration of
Conformity can be obtained from the manufacturer or the local AB AG representative whose
address can be taken from the list on http://www.AdvancedBionics.com/contact.
32
AB myPilot User Guide
(Figure B)
will be shown. The recipient is advised to
Minimum
Maximum
0˚C (32˚F)
45˚C (115˚F)
-20˚C (-4˚F)
55˚C (131˚F)
Description
Naída CI Sound Processor*
Advanced Bionics AG
Laubisrütistrasse 28
8712 Stäfa, Switzerland
+41.58.928.78.00
This instrument is certified under:
FCC ID: KWC-MYPILOT1
IC: 2262A-MYPILOT1
Notice 1
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may
cause undesired operation.
Notice 2
Changes or modifications made to this device not expressly approved by Phonak AG may void
the FCC authorization to operate this device.
Notice 3
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which the receiver is
•
connected.
Consult the dealer or an experienced radio/TV technician for help.
•
33
AB myPilot User Guide