Welcome; Description; Getting Started; Charging The Battery And General Battery Information - Advanced Bionics myPilot Manual Del Usuario

Welcome

Welcome to a world of remote control access for the Advanced Bionics Naída CI sound
processor with the elegant and user-friendly AB myPilot remote control and status reader. The
AB myPilot provides easy management of hearing programs with visual confirmation on a
state-of-the-art color display.
The AB myPilot can be used to adjust both Naída CIs simultaneously for bilateral recipients, or
control both Naída CIs individually, allowing the recipient to adjust each sound processor to any
specific hearing situation.
Please read this user guide thoroughly to benefit from all the features of the new AB myPilot.
For safe handling and usage, carefully read the
Ask a hearing care professional if you have any questions.
For further information, please visit the Advanced Bionics website, AdvancedBionics.com.

Description

On/Off Button
Color LCD
Display Connection
Mini USB
6
AB myPilot User Guide
Warnings and Cautions in the previous section.
Reset Button
Keypad
Left (Previous Program)
Up (FlexControl/Volume Up)
Center (Menu/Select/Home)
Right (Next Program)
Down (FlexControl/Volume Down)
To access the sub-menu, briefly press the center button.
•
Home
To return to the screen, press the center button for two seconds. Returning to the
•
Home
screen will automatically select the last used program.

Getting Started

Charging the Battery and General Battery Information

1
The AB myPilot has an internal
rechargeable battery. To charge it, connect
the charging cable to the AB myPilot.
For safety reasons, recharge the battery only with chargers supplied by Advanced Bionics.
During the charging process, the battery symbol on the Home screen will flash. Once the
battery is fully charged, the battery symbol will stop flashing and remain visible.
Charging an empty battery typically takes about 90 minutes. It is safe to leave the charger
connected overnight—the battery cannot be overcharged.
When charging the AB myPilot for the first time, leave it to charge for five hours, even if the
battery symbol stops flashing.
A new battery's full performance is achieved only after two or three complete charge and
discharge cycles.
The AB myPilot battery can be charged hundreds of times. If the operating time of the AB
myPilot reduces substantially, please contact a hearing care professional or Advanced Bionics.
2
Plug the other end of the charging
cable into a power outlet. Do not use
the AB myPilot while charging.
7
AB myPilot User Guide