Symbols; Description Of The Appliance And Its Accessories; Cleaning Before First Use - Imetec L3701 Instrucciones Para El Uso

• To wash the stem of the hand blender, partly fill the measuring jug
with water and washing-up liquid. Connect the plug to the socket,
insert the stem in the container and turn on. Rinse it and repeat
the operation several times, changing the water. Unplug and dry.
• The maximum power is based on the accessory that exerts a
higher load. Other accessories can absorb less power.

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1. On/Off button
2. Motor casing
3. Technical data
4. Plastic stem (if present)
5. Stainless steel stem support (if
present)
• Unpack the appliance.
• Clean the accessories according to the following table:
Accessory
Motor casing (2)
Chopper lid (9)
Chopper blades (10)
Chopper bowl (11)

SYMBOLS

Warning
Prohibited
Protection class II

CLEANING BEFORE FIRST USE

Under run-
ning water
Stem (4/6)
6. Stainless steel stem (if present)
7. Blades of the stem
8. Plug
9. Chopper lid (if present)
10. Chopper blades (if present)
11. Chopper bowl (if present)
In the dish-
washer at a
maximum
temperature of
55°C.
✓
With a damp
and well-wrung
sponge
✓
✓
EN
✓
✓
11