EN
Accessory
Chopper (11)
Chopper (11)
•
Insert the motor casing (2) on the stem of the hand blender (4/6) by matching the triangle
on the motor casing with the symbol of the open padlock placed on the stem [Fig. B].
•
Turn the motor casing (2) anti-clockwise, matching the triangle with the symbol of the
closed padlock until you hear a "click" [Fig. C].
ATTENTION!
• Operation must not exceed 1 minute. Before repeating this cycle, let the
appliance cool down for 1 minute.
•
DO NOT use the appliance with solid ingredients.
•
NEVER immerse the stainless steel stem support (5) in the mixture [Fig. D].
•
Place the ingredients in a container.
•
Insert the plug (8) in the socket.
•
Insert the stem of the hand blender (4/6) into the container until the blades (7) are fully
immersed into the mixture.
•
Start the appliance by pressing the on/off button (1).
ASSEMBLING THE CHOPPER (IF PRESENT)
ATTENTION!
•
DO NOT use the chopper solely with liquid ingredients.
•
DO NOT insert cheese rinds as they can damage the motor.
•
Chop the ingredients into small pieces.
•
The appliance must not be used for more than 15 seconds. Before repeating
the cycle, let the appliance cool down for 1 minute.
•
Insert the chopper blades (10) in the chopper bowl (11) [Fig. E].
•
Place the ingredients in the chopper bowl (11).
•
Close the chopper bowl (11) with the chopper lid (9) [Fig. F].
•
Insert the motor casing (2) on the chopper lid (9) [Fig. G].
12
OPERATION
Ingredients
Raw meat
Honey and
butter
ASSEMBLING THE HAND BLENDER
USING THE HAND BLENDER
Maximum
amount
350 g
300 g + 200 g
Maximum use time
15"
5'' and 2' for the appliance
to cool