Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
For the appliance features, refer to the external packaging.
1.
Cover
2.
Blender jug
3.
Blades
4.
Gasket
5.
Ring nut
Unpack the appliance and remove any inserts or adhesive labels from the product.
•
Wash the removable components: the blender jug (2), the lid (1), the gasket (4) and
the ring nut (5) by hand with soap and water or in the dishwasher at a temperature no
higher than 55°C.
•
Dry with a dry cloth.
The on/off controls have the following speeds:
0
Appliance OFF
1
Low speed
•
Place the gasket (4) on the blade plate (3) [FIG. B].
•
Insert the blades (3) inside the ring nut (5) [FIG. C].
•
Turn the ring nut (5) clockwise onto the blender jug (2) [FIG. D].
•
Insert the blender jug (2) onto the motor unit (6) [FIG. E]
IMPORTANT!
•
Do NOT use the appliance with solid ingredients only.
•
Do NOT use the appliance with no ingredients in it.
•
Do NOT remove the blender jug (2) to start or stop the appliance instead
of using the on/off selector (7).
•
Continuous operation must not exceed one minute. Before repeating this
cycle, let the appliance cool down completely.
CLEANING BEFORE FIRST USE
OPERATION
ASSEMBLY
6.
Motor casing
7.
On/off control
8.
Technical data
9.
Plug
2
High speed
Pulse mode to add volume to the
mixture
USE
EN
11
Publicidad
Tabla de contenido
