Listening To Fm Radio - auna 388 DAB+ Manual Del Usario

EN
36

LISTENING TO FM RADIO

Manual tuning
1. Plug in the provided DAB/FM tuner antenna to the antenna socket (30)
then switch on the unit by On/Standby button (6), then press Function
button (10) to select " DAB " mode then press Band button (16) to select
FM mode.
2. Tune to the required station by pressing the Tuning Up or Down button
(23/13).
3. Turn the Volume knob (19) to the desired volume level.
Auto tuning (on the remote control only)
1. Set the unit to FM mode.
2. Press the Scan button once on the remote control; unit will start to scan
at tuning up direct until radio station received. Press and hold the Scan
button on the remote control for a second, the unit will scan to tuning
down direction. If the radio data system (RDS) broadcasting signal
received, the unit will set the actual time automatically.
3. Turn the Volume knob (19) to the desired volume level.
Radio data system (RDS)
This is the features to display the information which released from the
radio broadcast and will showed on LCD display step by step as below by
pressing the Info button (on the remote control) continuously.
Radio text  program type  signal strength  date/time  frequency 
mono/stereo.
Digital audio broadcasting (DAB) radio
1. Set the unit to "DAB" mode by Function button (10).
2. Press the Scan button on the remote control once; unit will start to full
scan from range 11b-12d one time within around 2 seconds. Then press
Tune up/down button (23/13) to select your desired DAB channel.
3. Press the Info button continuously to check the below info released by
DAB.
Group name  frequency  transfer rate  signal strength  date/time
 program type  scrolling text
4. Press the Volume knob (19) to the desired volume level.