Power Supply; How To Scan - Datalogic Magellan 1100i Guía De Referencia Rápida

Ocultar thumbs Ver también para Magellan 1100i:

Optional Stand

An optional stand is available for the scanner which can be per-

manently attached to a wall or countertop. After locating the

stand in an optimal position, the scanner (along with the stand)

can be detached for portable use by lifting the entire unit as

shown below.

Power Supply

Models require

ited Power Source (LPS). For the safety certification to be

valid, class III input power sources must be IEC/EN60950-1

(EN 60335-series, EN 60065 or relevant) approved.

Input: 100 - 240 VAC Output: 5 VDC

System Input Voltage

Input: 4.5 - 14.0 VDC

barcodes can be presented to the scanner while it is resting on

the counter or in the optional stand, or the scanner/mount can

be lifted and held as shown.

1. Power Off the Terminal (POT) units do not require a power sup-

ply.

either a Listed class II or class III with a Lim-

Optional Scan Button Shown

*Optional Stand

Max. Current: 2.5 A

Max. Power: 12.5 W

Max. Power: 2.5 W

Magellan™ 1100i

Tabla de Contenido