EN 22
To empty the grass-catcher:
1. lower the engine speed;
2. go into neutral (N) (☛ 4.4) and stop the
machine's forward movement;
3. engage the parking brake on slopes;
4. disengage the blade (☛ 4.6);
5. hold onto the rear handle and tip up the
grass-catcher to empty it;
NOTE
done with the blade disengaged, otherwise
the engine stops.
5.4.7 U
NBLOCKING THE COLLECTOR CHANNEL
WARNING!
!
off.
If the collector channel gets blocked (due to accumulated grass cuttings filling up
the grass-catcher or an excessively high speed with relation to the quantity of
grass cuttings), you need to:
1. stop forward movement immediately, disengage the blade and stop the en-
gine;
2. remove the grass-catcher;
3. rremove the accumulated cuttings, reaching them from the exit of the collector
channel.
5.4.8 E
ND OF MOWING
When you have finished mowing, disengage the blade, lower the engine speed
and ride the machine with the cutting deck in the highest position.
This operation can only be
This job must only be performed with the engine turned
HOW TO USE THE MACHINE