Replacing Fuses; Connecting The Microphone; Installing An Antenna; External Speakers - Midland M-30 Manual Del Usuario

Transceptor móvil cb am/fm
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45

Replacing fuses

If the fuse blows, try to find a cause before replacing it. If necessary, contact a
service center for assistance.
The fuse on the rear of the radio has a current rating of 5A
5A 250V FUSE
IN-LINE FUSE HOLDER

Connecting the microphone

Plug-in the supplied microphone to the proper connector on the front panel of
the radio.
The microphone can be hung up thanks to the holder supplied in the packaging.

Installing an antenna

Place the antenna as high as possible
The longer is the antenna, the better will be the performance
If possible, mount the antenna in the centre of the surface
Keep the antenna cable away from noise sources, such as the ignition switch,
gauges, etc
Make sure you have a solid metal-to-metal ground connection
Prevent cable damage during antenna installation
Attention: To prevent damage, never operate your radio without connecting a proper
antenna. A periodical control of the cable and of the S.W.R. is recommended.

External speakers

If you use external speakers, the impedance must be 4 Ω or 8 Ω. The external
speaker jack accepts a 3.5mm mono plug.
4 |
M-30 Instruction Guide

Controls and display description

9
2
11
P1
P2
midlandeurope.com
P3
1
3
4
1.
Power ON/OFF control. Keep pressed to turn on and off the transceiver.
Shortly press to enable/disable the speaker.
2.
P1 programmable key
3.
P2 programmable key
4.
P3 programmable key
5.
P4 programmable key
6.
P5 programmable key
7.
P6 programmable key
8.
FUNC: function button. With this control you activate the secondary fun-
ctions of the programmable keys on the front panel of the radio. Keep it pres-
sed to enter the menu.
9.
Mike connector: plug-in the microphone or the optional programming cable.
10. Main knob: shortly push to skip 10 channels forwards, while if you keep it
pressed the keypad is locked/unlocked. The main knob allows to look through
the menu options and to change the settings. Shortly press to confirm your
selection.
11.
Graphic multicolor display
M-30 Instruction Guide
5
10
P4
P5
P6
FUNC
7
6 8
ANT
EXT SP
| 5

Publicidad

Tabla de contenido
loading

Tabla de contenido