Midland M-30 Manual Del Usuario página 29

Time Out Timer
The time out timer (TOT) automatically switches the radio in reception mode if
you talk for too long, after a pre-set time that can change from 1 minute up to 30
minutes.
Before stopping the transmission, M-30 emits an acoustic alarm to warn you.
This function is also useful to prevent an overheating of the equipment.
We suggest you keeping the TOT enabled.
TOT can be adjusted also from the radio menu:
1. Access the radio menu and follow this procedure: MENUFUNC
MENUTOT
2. Set the desired time and confirm by pushing the main knob.
Setting the level of the display backlight
Enter the radio menu and follow this procedure: MENUFUNC
1.
MENUDIM
Set the desired level and confirm by pushing the main knob.
2.
3. The levels available are 3: 1 is the least bright, while 3 is the brightest.
Automatic turning on
You can set the automatic turning on of the radio when the vehicle is switched on.
1. Enter the radio menu and follow this path: MENUUTILITIES FUNC
MENUAOP
2. Set the desired option and push the knob for confirmation.
Menu of the radio
M-30 is supplied with 3 menu; it is possible to use all of them or enable only some.
Enter the radio menu and follow these steps:
1. MENUUTILITIES FUNC MENUKEYS
2. Choose amongst the following options:
1/2/3, to enable all menu,
1/2, to enable menu 1 and 2,
2/3, to enable menu 2 and 3,
1/3, to enable 1 and 3.
3. Select the desired option and confirm by pushing the main knob.
Reset
1. Enter the radio menu and follow this path: MENUFUNC MENURST
2. Select one of these options:
OPT, to make a reset of the settings only; it won't reset the memories.
ALL, to make a complete reset: settings and memories.
3. Select the desired setting and confirm by pushing the knob.
20 | M-30 Instruction Guide
Troubleshooting
PROBLEM SOLUTION
The radio does not turn on Power supply cable disconnected or defective.
Check its status.
Fuse broken. Check the status of the fuses in
the radio and in your vehicle.
The keyboard does not work The Keypad lock is activated
M-30 Instruction Guide | 21