Raychem E-100-LR Instrucciones De Instalación página 2

2
E-100-LR Light Retrofit Installation Instructions
Heating Cable Types
Inner jacket
Conductive core
Bus wire
BTV-CR, BTV-CT, QTVR-CT
Light Replacement
Go to Step A
2
CAUTION: Health Hazard.
Wash hands if you contact seal-
ant. Consult MSDS VEN0033.
• Remove and discard boot.
• Using a dry towel, clean sealant
from end of heating cable.
Outer
jacket
Braid
Spacer
Bus wire
XTV-CT, KTV-CT
Light Retrofit
Go to Step 1
Outer jacket
Braid
Inner jacket
Conductive fiber
Insulated bus wire
VPL-CT
1
Begin here for light retrofit.
WARNING: Shock Hazard.
Electrical conductors will be
exposed. Re-entry should only be
performed by qualified personnel.
Turn off power and follow standard
electrical lockout procedures
before opening end seal.
3
BTV, QTVR
XTV, KTV
Braid
Inner jacket
Heating element
Bus wire connection
Clear jacket
• Turn off power.
• Clip cable tie and
remove.
• Unscrew cap from end
seal stand.
• Remove cap from yellow
leash.
Go to Step 4a
Go to Step 4a
Go to Step 4b
VPL
Outer
jacket