Raychem E-100-LR Instrucciones De Instalación página 5

6
• Install new light
assembly into leash.
• Place blue crimps
onto bus wires.
7
• Push excess wire
inside light.
8
• Leave these instructions with the end
user for future reference.
3/8"
(9 mm)
Leash
• Hand tighten light onto
end seal stand.
Be sure wires
are not caught
in threads.
Trim
E-100-LR Light Retrofit Installation Instructions
• Crimp bus wires to
lead wires.
• Insert cable tie through
slots on stand and light
then tighten.
5
Go to Page 8