Structural Layout - Lindhaus Taski Manual Del Usuario

Structural layout

1
2
3
4
5
1 Information double filter paper bag full
2 Power supply cord
3 Holding bar (on the back)
4 Guide bar
5 Suction skirt
6 Suction hose
7 Exhaust filter lid
8 Main switch (ON/OFF)
9 Release for suction unit cover (double filter paper
bag)
36
Prior to commissioning
Installing the device
Notice:
9
Set the guide bar of the single-disc ma-
chine to the vertical position before mount-
ing the device.
8
• Remove the plug of the single-disc machine from the mains
socket.
7
1
6
• Use the tool as described in the ergodisc 165/175/200/238/
300/400/430/duo or ergodisc 1200 manual.
Notice:
The double filter paper bag is included in
the delivery.
For changing the double filter paper bag,
see page 37.
Attention:
This machine must never be operated
without the double filter paper bag!
• Position the device on the holder of
the single-disc machine and lock in
into place using the holding bar (1).
• Insert the power supply cord of the
device into the power socket of the
single-disc machine.
• Insert the brush or the pad drive with
pad into the suction skirt.
• Put the tool on the floor in line with
the machine.
• Insert the suction hose.