Lindhaus Taski Manual Del Usuario página 39

• Push the new double filter paper bag
up.
• Replace the cover of the suction unit.
The cover of the suction unit must be
locked in place.
Cleaning/replacing the motor protection filter
Attention:
Never insert a wet or moist motor protec-
tion filter. This may damage the motor of
the machine!
• Press the release switch and remove
the suction unit cover.
• Remove the filter holder.
• Remove the motor protection filter
from the filter holder.
Attention:
Do not tumble dry the foam filter!
• Clean it (by hand) or replace the mo-
tor protection filter.
Let the motor protection filter dry
completely before reinsertion.
• Reinsert the motor protection filter
into the filter holder.
• Insert the filter holder into the intend-
ed holder.
• Replace the cover of the suction unit.
The cover of the suction unit must be
locked in place.
38
Checking/replacing the exhaust filter
Notice:
Check the exhaust filter for soiling on a
regular basis and replace when neces-
sary.
• Press the snap lock down and re-
move the exhaust air cover.
• Remove the micro filter or the HEPA
filter and replace it with a new one.
• Reinsert the new micro filter or HEPA
filter.
Ensure that the filter is locked into
position.
• Insert the exhaust air grating into the
corresponding slits and close it.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.