Classification of Versions:
By size: H03/70 & H03/80
If it has a fan: CONVECTOR
If there is no fan: CONVENTIONAL
If it features a double removable rear section: DB
If it features a double rear section and draw control: DB/R
Depending on the type of door: CLASSIC, PLANE or CURVED
Descriptive view of the possible versions:
H-03/70/80 - CONVENTIONAL, DB &
Three possible DOOR models
H-03/70 CONVENTIONAL FIREPLACE
This Fireplace provides heat by radiation; directly heating walls, ceilings...
H-03/70-80 TURBOCONVECTOR FIREPLACE , This fireplace also comes with three possible front
sections. It is supplied fully assembled, ready to install and connect to the chimney and air conduits,
except for the fan that can be installed easily following the instructions included in this booklet.
It features a galvanised sheet metal enveloping chamber for forced convection by means of a fan, with
upper outlets to distribute the air.
The fan is controlled by an electronic module, which is governed automatically by the temperature
captured by an NTC probe or optionally by the user via a remote control.
The heat is provided by means of convection, distributing the hot air to the different rooms, and by
radiation, directly heating walls, ceiling...
I.- INTRODUCTION
DB/R
H-03/70/80 - TURBOCONVECTOR DB
18