Miele professional PG 8083 Plano De Instalación página 31

Technical Datasheet
Commercial dishwasher
Legend:
Electrical 1. Voltage (as supplied)
connection
Plug and socket connection recommended to facilitate
electrical safety tests. The socket must be accessible after
installation. On hard-wired machines, a multi-pole circuit
breaker with a minimum contact gap of 3 mm must be
provided on site. If necessary, equipotential bonding with
good galvanic contact must be provided in accordance with all
appropriate national and local regulations.
Cold water or Max. water hardness
Hot water Min. flow pressure
Max. pressure
Throughput
On-site connection thread
Length of connection hose (supplied)
Max. hot water temperature
Machine can be connected to water supply without the use of
a non-return valve.
Waste water Drain hose (Int. dia. × wall thickness × l)
Max. head height (measured from floor)
Max. transient throughput per drain hose
Hose sleeve for drain hose to be provided on site
(ext. dia. x l)
Maschine data Built-in height
Width
Depth
Installation should only be carried out by authorized fitters in accordance with valid regulations!
Observe installation instructions when installing machine! Adjacent cabinetry should be made from commercial-grade
materials to prevent damage from steam and condensate. All rights reserved! Subject to change. Dimensions in mm.
Version Date
A19564 12.12.2012
A41971 08.02.2016
A10001389 18.11.2016
Installationsplan PG 8083
Stand: 15.09.2017
Abbreviations in bold type:
Connection required
Abbreviations in circle with dashes:
Connection optional or required depending on model version
Rated load
Fuse rating
Connection cable, min. cross section
Length of supply lead with plug NEMA 14-30P
Voltage
Rated load
Fuse rating
Connection cable, min. cross section
Length of supply lead with plug NEMA
5-15P
Voltage variation
+ TR
600 mm  570 mm
PG 8083
CDN
V/Hz AC 120/208-240 / 60
kW 3.9-4.2
A 2 x 30
AWG 10/4
m 1.7
V/Hz AC 120/60
kW 1.5
A 1 x 15
AWG 14/3
m 1.7
gr/gal 36
kPa (psi) 30 (4.4)
kPa (psi) 1.000 (145)
l/min 6,0
inch 11.5 NH
3/4" external thread
mm 1500
°C 60
mm 22 x 6 x 1500
m 1,0
l/min 16
mm 22 x 30
mm 845 (+6.5)
mm 598
mm 570
Designation
en
31