Van (Full Size) 1988-1995 - Dynex DX-G1113 Guia Del Usuario

52
Chevrolet

Van (full size) 1988-1995

GMC
Van (full size) 1988-1995
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Carefully unsnap the radio trim bezel, then remove it.
3 Remove two screws that secure the factory head unit, then disconnect the wiring.
4 Cut and remove all mounting tabs on bracket 1 except the C tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to "Completing the installation" on page 76.
C
C
Installing your car stereo